Novell EDIRECTORY 8.8 - GUIDE Manual Download Page 342

Page: 342 / 574

Configuring LDAP Services for Novell eDirectory

343

ocx (

NU)

ebr
ua

ry
200
6

ldapconfig [-t

tree_name

| -p

host_name

port

]]

[-w

password

] [-a

admin_FDN

] -s “LDAP TCP

Port=389”,"searchSizeLimit=1000"

Attributes on the LDAP Server Object

Use the LDAP Server object to set up and manage the Novell LDAP server properties.

The following table provides a description of the LDAP server attributes:

Attribute

Description

LDAP Server

The fully distinguished name of the LDAP server object in
eDirectory.

LDAP Host Server

The fully distinguished name of the host eDirectory server
that the LDAP server runs on.

LDAP Group

The LDAP Group object in eDirectory that this LDAP server is
a member of.

LDAP Server Bind Limit

The number of clients that can simultaneously bind to the
LDAP server. A value of 0 (zero) indicates no limit.

LDAP Server Idle Timeout

The period of inactivity from a client after which LDAP server
terminates the connection with this client. A value of 0 (zero)
indicates no limit.

LDAP Enable TCP

Indicates whether TCP (non-TLS) connections are enabled
for this LDAP server.

Value=1 (yes), 0 (no)

LDAP Enable TLS

Indicates whether TLS connections are enabled for this LDAP
server.

Value=1 (yes), 0 (no)

LDAP TCP Port

The port number that the LDAP server listens on for TCP
(non-SSL) connections.

Range=0 to 65535

LDAP TLS Port

The port number that the LDAP server listens on for TLS
connections.

Range=0 to 65535, the maximum number of connections
allowed on the LDAP server.

keyMaterialName

The name of the Certificate object in eDirectory that is
associated with this LDAP server and will be used for SSL
LDAP connections.

searchSizeLimit

The maximum number of entries that the LDAP server will
return to an LDAP client in response to a search. A value of 0
(zero) indicates no limit.

searchTimeLimit

The maximum number of seconds after which an LDAP
search will be timed out by the LDAP server. A value of 0
(zero) indicates no limit.

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 342 / 574

Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews: