Novell EDIRECTORY 8.8 - GUIDE Page 223 Manual Download

Page: 223 / 574

Merging Novell eDirectory Trees

223

ocx (

NU)

ebr
ua

ry
200
6

You can also rename the tree after the merge so that the final tree name corresponds to the tree name
with the majority of client workstations.

Another option is to rename the merged tree to the name of the original source tree. If you choose
this option, then you must update the

net.cfg

files on the target tree client workstations.

Use the following list of prerequisites to determine readiness for the renaming operation:

Access to a server console on the source tree or an established RCONSOLE session with the
server

The Supervisor object right to the Tree object of the source tree

(Optional) All servers in the tree are operational (Servers that are down will update
automatically when they are operational.)

To rename the tree:

In Novell iManager, click the

Roles and Tasks

button

Click

eDirectory Maintenance

Rename Tree

Specify which server will run the Rename Tree Wizard (this should be a server in the target
tree), then click

Next

Authenticate to the server, then click

Next

Specify a new tree name and an Administrator username and password.

Click

Start

A Rename Tree Wizard Status window appears, showing the progress of the Rename process.

When a “Completed” message appears with information returned from the Rename process,
click

Close

to exit.

8.4 Using the eMBox Client to Merge Trees

The eDirectory Management Toolbox (eMBox) Client is a command line Java client that gives you
remote access to DSMerge. The

emboxclient.jar

file is installed on your server as part of

eDirectory. You can run it on any machine with a JVM. For more information on the eMBox Client,
see

Section 18.1, “Using the eMBox Command Line Client,” on page 531

8.4.1 Using the DSMerge eMTool

Run the eMBox Client in interactive mode by entering the following at the command line:

java -cp

path_to_the_file/

emboxclient.jar embox -i

(If you have already put the

emboxclient.jar

file in your class path, you need to enter

only

java embox -i

The eMBox Client prompt appears:

eMBox Client>

server_name_or_IP_address

-p

port_number

-u

username.context

-w

password

-n

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands

Novell EDIRECTORY 8.8 - GUIDE, Manual

Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands