Novell EDIRECTORY 8.8 - GUIDE Page 334 Manual Download

Page: 334 / 574

Configuring LDAP Services for Novell eDirectory

ocx (

NU)

ebr
ua

ry
200
6

335

Configuring LDAP Services for
Novell eDirectory

The eDirectory

installation program automatically installs LDAP Services for Novell

eDirectory.

For information on installing eDirectory, see the

Novell eDirectory 8.8 Installation Guide

This section explains the following:

•

Section 13.1, “Loading and Unloading LDAP Services for eDirectory,” on page 335

•

Section 13.2, “Verifying That the LDAP Server Is Loaded,” on page 336

•

Section 13.3, “Verifying That the LDAP Server Is Running,” on page 337

•

Section 13.4, “Configuring LDAP Objects,” on page 340

•

Section 13.5, “Refreshing the LDAP Server,” on page 344

•

Section 13.6, “Authentication and Security,” on page 345

•

Section 13.7, “Using the LDAP Server to Search the Directory,” on page 353

•

Section 13.9, “Configuring for Superior Referrals,” on page 363

•

Section 13.10, “Persistent Search: Configuring for eDirectory Events,” on page 367

•

Section 13.11, “Getting Information about the LDAP Server,” on page 370

For information on LDAP tools, see

LDAP Tools (http://developer.novell.com/ndk/doc/cldap/

index.html?ldaplibc/data/a6eup29.html)

13.1 Loading and Unloading LDAP Services for

eDirectory

To load LDAP Services for eDirectory, enter the following commands:

To unload LDAP Services for eDirectory, enter the following commands:

Server

Command

NetWare

At the console prompt, enter

load nldap.nlm

Windows

In the DHOST (NDSCONS) screen, click

Nldap.dlm

Start

Linux, Solaris, AIX, or HP-UX

At the Linux, Solaris, AIX, or HP-UX prompt, enter

/opt/novell/eDirectory/sbin/nldap -l

Server

Command

NetWare

At the console prompt, enter

unload nldap.nlm

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands

Novell EDIRECTORY 8.8 - GUIDE, Manual

Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands