Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 408 / 574

Share

Page: 408 / 574

Novell EDIRECTORY 8.8 - GUIDE Manual Download Page 408

Backing Up and Restoring Novell eDirectory

409

no

vd

ocx (

E

NU)

01

F

ebr
ua

ry
200
6

4

Periodically check the results recorded in the log file you specified, to make sure the
unattended backups are successful.

Examples of System Batch Files for Unattended Backups

Below are the following two examples:

•

“Example Batch File for NetWare” on page 409

•

“Example Batch File for Windows” on page 409

Example Batch File for NetWare

java -nsac -cp sys:\system\embox\eMBoxClient.jar embox -s 10.10.1.200
-p 8008 -u admin.mycontainer -w mypassword -n -t backup.backup -b -f
sys:\system\backup\backup.bak -l sys:\system\backup\backup.log -u
sys:\system\backup\includefile.txt -t -w

In this example batch file, the following options are shown.

• On NetWare only, include

-nsac

after the java command. (Don't use

-nsac

on any other

platform.)

WARNING:

On a NetWare server only, to avoid an abend you must include

-ns

.

The -ns option opens a new screen.

The ac option automatically closes the screen when the batch file task is complete. If you don't
include ac in NetWare batch files, each time the backup batch file is run unattended a screen
will be left open on the server.

• A full backup is specified (-b).
• An include file is specified (-u). This is optional. You can use an include file if you want to

back up other files of your choice. The include file must be created beforehand.

• Stream files (-t) are also backed up.
• The option to overwrite a backup file of the same name is specified (-w).

IMPORTANT:

If a backup file of the same name exists (this is likely if you use the same batch

file regularly), it's important to use the -w option to overwrite the existing backup file to make
sure your backup is successful.
In batch mode, if -w is not specified and a file of the same name exists, the default behavior is
to not overwrite the file, so a backup is not created. (In interactive mode, if -w is not specified,
the eMBox Client will ask you whether you want to overwrite the file.)

If you are making a file system backup shortly after each full or incremental backup of
eDirectory, your previous backup files should have been copied from the server to file system
backup tapes, so it should be safe to use this option to overwrite the existing backup file.

• A nonsecure port is used in this example (-p 8008), so a nonsecure connection is specified (-n).

Example Batch File for Windows

java -cp c:\novell\nds\embox\eMBoxClient.jar embox -s myserver -p 8008
-u admin.myorg -w mypassword -n -t backup.backup -b -f

«
...
406
407
408
409
410
...
»

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Reviews:

No comments