Novatest S.r.l.
Manual for Multichannel Ultrasonic Pile Integrity Tester
80
transducer is placed back to the designated position, this dialogue box
will disappear automatically and pile test system will start sampling
again; now user can continuously lift or put down transducer until the
test of this profile is completed.
If adopt manual test mode, user must press Save button once
after every test point has been tested, then move transducer to next
test point for continuous test.
NOTE: After have saved the first test point, recorded
height value will display on the top status bar on screen.
Current height of transducer will display all the time in
automatic test; height of next test point will display in manual
test.
3.3.2 Stop sampling
After all test points have been collected, press Stop button to stop
sampling, now the Stop button turns into Sample button and data
have been saved in disk automatically.
3.3.3 Retest
Retest refers to testing the part or all of the tested data once
again. During sampling, any unsatisfying data may be retested at any
time.