Novatest U5600 Instruction Manual Download Page 52 | Manualshive

Page: 52 / 195

Novatest U5600 Instruction Manual Download Page 52

Novatest S.r.l.

[email protected]

www.novatest.it

Manual for Multichannel Ultrasonic Pile Integrity Tester

44

It will be inquired that “whether delete selected project or file?”,

press Yes to delete it, press No for not.

NOTE: Deleted data cannot be recovered! Make sure

all data to be deleted has been kept a backup in computer
before deletion. When all data files of one project have been
deleted, the project folder will be deleted automatically.

3.5.5 Project and file upload

Tick off a project in project list and press Upload button to

upload all files in this project to test management system.

Tick off one or more files in file list and press Upload button to

upload the selected files to test management system.

When no project or file is selected, Upload button is invalid.

NOTE: Developed by Beijing ZBL Science and

Technology Co., Ltd, this test management system is used to
manage the whole process of nondestructive test; only users
who have bought this system may upload test data. Please
refer to the

Operation Manual

for details.

3.5.6 Exit

Press Quit button to exit from file management and return to main

interface.

«
...
50
51
52
53
54
...
»

Summary of Contents for U5600




































































































































































































Reviews:

No comments