manualshive.com logo in svg

Novatest U5600, Instruction Manual, Page: 43 / 195

Share
Download
Novatest U5600 Instruction Manual Download Page 43

Novatest S.r.l.

[email protected]

www.novatest.it

Manual for Multichannel Ultrasonic Pile Integrity Tester

 

 35

3.4.1 Terminology

1) Dynamic sampling: It refers to the process of continuously 

and repeatedly transmitting, collecting, processing, 
interpreting and displaying waveform and acoustic 
parameter. 

2) Dynamic waveform: It refers to the continuously refreshing 

waveform in single- channel waveform range on screen in 
dynamic sampling.   

3) Static waveform: It refers to the static waveform in 

single-channel waveform range on screen when stop 
sampling. 

4) Head wave (preliminary wave): The first wave crest or 

trough of waveform received by instrument.   

5) Noise range: Manual-set noise range in dynamic sampling, 

it is used to distinguish waveform from noise; any 
waveforms with amplitude not exceeding such range is 
considered as noise.   

6) Threshold value: It is one of the automatic judging criteria 

of head wave, only the waveform exceeding threshold 
value line will be possibly judged as head wave; the two 
dotted lines above and below base line, as shown in Figure 

Summary of Contents for U5600




































































































































































































Reviews:

No comments