manualshive.com logo in svg

Nortel 1002rp, Maintenance And Diagnostics

Share
Download
Nortel 1002rp Maintenance And Diagnostics Download Page 97

January 2007

Using CallPilot system utilities

1002rp Server Maintenance and Diagnostics

97

PEP Maintenance utility

The PEP Maintenance utility displays a list of all installed PEPs on the 
server and enables you to uninstall PEPs. For information on installing 
or uninstalling PEPs, refer to the 

Installation and Configuration Task 

List

 (555-7101-210).

To access the PEP Maintenance utility

From the Windows desktop, click Start 

➝

 Programs 

➝

 CallPilot 

➝

 

System Utilities 

➝

 PEP Maintenance Utility. 

Result: 

The DMI Viewer window appears.

To view a list of all installed PEPs

1

Click the component for which you want to display the PEP list.

2

Click Show PEPs.

Result: 

A list of all installed PEPs appears in the left pane.

3

If you want to review the readme file associated with a PEP, click 
the PEP, and then click Read.

Result: 

The readme file opens in Notepad.

Summary of Contents for 1002rp



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands