Nortel 1002rp, Maintenance And Diagnostics

Page: 91 / 218

January 2007 Using CallPilot Manager to monitor hardware
1002rp Server Maintenance and Diagnostics 91
3 Do one of the following:
4 Click Courtesy Stop or Start as required.
Result: If you clicked Courtesy Stop or Start, you are asked to
confirm the Courtesy Stop or Start. Click OK.
The selected channels change to off-duty or idle status, according
to the action you chose.
Note: If the buttons are not available, wait a few seconds for the
screen to refresh.
IF you want to stop or start THEN
all of the channels associated with
a DS30X link select the check box to the left of the
DS30X link that you want to stop or
start.
Repeat this step for each DS30X
link.
only one or several channels that
are associated with a DS30X link select the check box for each
channel that you want to stop or
start.