Nortel 1002rp, Maintenance And Diagnostics

Page: 43 / 218

January 2007 Using Windows online diagnostic tools
1002rp Server Maintenance and Diagnostics 43
Result: The system runs the tracert utility.
4 Type Exit to exit the Command Prompt window and return to
Windows.
The arp command
The arp command displays and modifies the IP-to-physical address
translation tables used by Address Resolution Protocol (ARP).
ARP command syntax
The ARP command uses the following syntax:
arp -s inet_addr eth_addr [if_addr]
arp -d inet_addr [if_addr]
arp -a [inet_addr] [-N if_addr]
ARP command parameters
Table 5: ARP command parameters
Parameter Description
-a Displays current arp entries by interrogating the current
protocol data. If inet_addr is specified, the IP and
physical addresses for only the specified computer
appear. If more than one network interface uses arp,
entries for each arp table appear.
-g Same as -a.
inet_addr Specifies an Internet address.
if_addr Specifies the Internet address of the interface where the
address translation table should be modified. If not
present, the first applicable interface is used.
eth_addr Specifies a physical address.