Nortel 1002rp, Maintenance And Diagnostics

Page: 121 / 218

January 2007 Replacing basic chassis components
1002rp Server Maintenance and Diagnostics 121
5 Check the RAID drive consistency:
a. Select Check Consistency.
Result: The Logical Drives Configured dialog box appears.
b. Use the arrow key to highlight the first drive to be checked.
c. Press the space key to select the drive.
d. Press F10 to check consistency.
Result: The Do you wish to continue? dialog box appears.
e. Click Ok.
Result: The consistency check begins and a status dialog box
appears.
f. Repeat steps c to e for each drive until all three drives have
been checked for consistency. This may take up to 2 hours to
complete. If any data consistency errors are detected, they are
corrected automatically.
6 Perform a full-system backup of the CallPilot server (either to tape
or file server).
7 Review the backup logs to verify success.
8 Perform a controlled shutdown of the CallPilot software:
a. Click Ctrl+Alt+Delete and select Shutdown from the Windows
Security window.
Result: The Shutdown Computer dialog box appears.
b. Select Shutdown.
Result: The CallPilot server turns off.
9 Remove power from the system by disconnecting the AC or DC
mains.
10 Remove the bezel cover from the front of the chassis using the four
snaps located at each corner.