Nortel 1002rp, Maintenance And Diagnostics

Page: 178 / 218

Upgrading to High Capacity Standard 1.11
178 CallPilot
Upgrading to High Capacity
Choose one of the following upgrade procedures based on your switch
connectivity.
Upgrading to High Capacity: T1 switch connectivity
To add two MPB96 boards and two T1 PCI cards
1 Courtesy stop all CallPilot channels.
2 Power down the server and all peripheral devices.
3 Disconnect the following cables:
a. power cable
b. peripheral device cable
c. D/480JCT-2T1 cables
ATTENTION
You must use one of the valid configurations and
respect the slot map or the system behavior will be
erratic.
.
CAUTION
Risk of electrical damage
„
Wear an antistatic ESD wrist strap when handling cards or
boards, or when working inside the server.
„
Do not touch the components or gold-edge connectors of
cards or boards.
„
Place the cards and boards on an antistatic surface until you
are ready to install them.