Removal and Installation
10-44
Part 7440274
2017 Nordson Corporation
6. Remove nuts (5) securing power supply cover (2) to power supply
assembly (1).
NOTE:
It may be necessary to secure socket head cap screws with an hex
key to facilitate nut removal.
1
2
3
4
5
Figure 10-54 Power Supply Cover Removal (1 of 2)
7. Remove power supply cover (2) from power supply frame (1).
1
2
Figure 10-55 Power Supply Cover Removal (2 of 2)
Installation
Installation of power supply cover is in the reverse order of removal. Note
the following:
Loosely install socket head cap screws, lock washers, and nuts securing
power supply cover to power supply assembly and tighten in sequence
to 13.5 N
m (10.0 ft
−
lb).
Loosely install socket head screws securing primary cover to primary
cover bracket (LH/RH) and then tighten until they are snug.
CAUTION:
Apply Loctite 242 or 248,or equivalent removable thread locker,
to threads of socket head cap screws securing power supply cover to power
supply assembly.