Operation
7-2
Part 7440274
2017 Nordson Corporation
Dispense Mode Descriptions
The dispense command is a signal which instructs the Pro
−
Meter V2K to
dispense material based on the mode selected. The Pro
−
Meter V2K can
dispense material in four distinct modes (Auto Flow Mode, Auto Shot Mode,
Manual Flow Mode, and Manual Shot Mode).
Auto Flow Mode
Auto Flow Mode relies on an external device (example: robot) to provide all
dispense and reload commands through the machine interlock. The system
will continue to dispense and reload as long as a signal is received from the
external source.
Auto Shot Mode
Auto Shot Mode accommodates the completion of several automated
dispense shots and reloads as dictated by the shot counter and various
system parameters. This mode does not rely on signals from an external
device.
Manual Flow Mode
Manual Flow Mode allows for the continuous engagement of the dispense
command. The system will continue to dispense as long as the trigger is
engaged. If the trigger is released and depressed again, system operation
resumes from the last position.
Manual Shot Mode
Manual Shot Mode allows momentary engagement of the dispense
command which completes one dispense shot and reload as dictated by
setup parameters.