Nordson Sealant Equipment PRO-METER V2K, Customer Product Manual, Page: 16 / 195

Description
2-2
Part 7440274
2017 Nordson Corporation
Meter Assembly Standard Components
Table 2-1 Pro − Meter V2K Description
Item Description
1 Gravity tank (if equipped) − supplies material to dispense system
2 Air actuator − drives the carriage in a reciprocating motion. This reciprocating motion moves the
metering rods within the metering cartridge assemblies. This movement drives material through
the metering cartridge assembly discharge port where it is later dispensed via a dispense valve.
3 Ball valve − serves as the inlet valve for the dispense system
4 Metering cartridge assembly − metering rods, along with associated seals and bearings, displace
material through the discharge port and on to the dispense valve
5 Power supply assembly − contains power switch, power supply, power connections, and filter
regulator assembly
6 Micro PLC − serves as the system logic controller and directly interacts with HMI control panel
7 Pneumatic valve manifold − contains air solenoids that routes air to system components
1
2
3
4
5
6
7
Figure 2-1 Pro − Meter V2K Standard Components