Nordson Sealant Equipment PRO-METER V2K, Customer Product Manual, Page: 113 / 195

Disassembly and Assembly
11-11
Part 7440274
2017 Nordson Corporation
Assembly
Assembly is in the reverse order of disassembly. Note the following:
Refer to Metering Cartridge Assembly Service Kit (page 15 − 37) for a
detailed listing of available metering cartridge assembly service kits.
Hand tighten tie rods to metering cylinder body so that they are snug.
Loosely install nuts (15) and tighten to 13.5 N m (10.0 ft − lb). See Figure
11-59.
Hand tighten bearing retainer until it is snug.
CAUTION:
Do not reuse bearings, O − rings, caps, Parbak rings, and seals.
Do not utilize sharp or pointed tools to install O − rings and seals.
Apply Chevron Petrolatum Snow to bearings, O − rings, caps, Parbak
rings, and seals.
Be sure to correctly install the seals into the lantern ring.
Place lantern ring in an arbor press and carefully install seal.