3.2 External Control Unit
BU 0200 GB
Subject to technical alterations
43
3.2 Overview of external control devices
Module
Description
Data
SimpleBox
handheld
SK CSX-3H
Used for commissioning, parameterisation,
configuration and control of the FI. Storage of
the parameters is not possible.
Manual BU 0040 (www.nord.com)
4-digit, 7-segment LED display
IP20
RJ12-RJ12 cable
Part No. 275281013
ParameterBox
handheld
SK PAR-3H
Used for commissioning, parameterisation,
configuration and control of the FI.
Manual BU 0040 (www.nord.com)
4 digit back-lit LCD display, keyboard
Stores up to 5 complete FI data sets
IP20
RJ12-RJ12 cable
USB cable
Part No. 275281014
RJ12-RJ12 cable
For direct connection of the SK 200E to one of
the two control units.
approx. 2m long
Included in the scope of delivery of CSX and
PAR
Mounting the control unit on the SK 200E:
Mounting
of the control unit is performed as
follows:
1. Remove the protective cap from the RJ12
connector.
2. Connect the RJ12-RJ12 cable between
the control unit and the frequency
inverter.
3.
During normal operation after
commissioning, it is essential to replace
the protective caps and pay attention to
sealing.
4. As long as one of the protective caps is
open, take care that no dirt or moisture
enters the device.
