Instruction Manual
OCM F
Page 8
OCM F - Rev. 04 as of 18.02.2014
®
3.4
Device Identification
The instructions in this manual apply only for the type of device indicated on the
title page. The nameplate is fixed on the on the bottom of the device and con-
tains the following:
−
Name and address of manufacturer
−
CE label
−
Type and serial number
−
Year of manufacture
−
Ex-label (on Ex-version devices only) as mentioned in chapter Special Dan-
ger Notes.
It is important for enquiries and replacement part orders to specify article num-
ber as well as serial number of the respective transmitter or sensor. This en-
sures correct and quick processing.
Fig. 3-1
Transmitter nameplate
This instruction manual is a part of the device and must be available for the
user at any time.
The safety instructions contained within must be followed.
In addition to this instruction manual please see the "Technical Instruction of
Doppler Sensors" as well as the "Installation Instruction for Correlation and
Doppler Sensors" to correctly install and to operate the complete system.
WARNING
Do not disable safety devices!
It is strictly prohibited to disable safety measures or to change the way
they work!
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
