Instruction Manual
OCM F
OCM F - Rev. 04 as of 18.02.2014
Page 39
8.5
Operation Basics
The entire operation of the OCM F is menu driven.
To navigate within the menu structure use the 4 control keys (see chapter 8.3).
>up<
-
navigates upward in the respective submenu (e.g.
PAR/measurement place/name)
-
select pre-set values e.g. units (m, cm, l/s, m³/s etc.)
-
increase values
>down<
-
navigates downward in the respective submenu (e.g. PAR/
measurement place/name)
-
select pre-set values e.g. units (m, cm, l/s, m³/s etc.)
-
decrease values,
-
set decimal point
>left<
-
press once ; toggle between indication mode and overview menu
(main menu)
-
jump across in main or submenu
-
jump across between identical measurement values (e.g. span of
analog outputs 1 – 3)
>right<
-
press once ; toggle between indication mode and overview menu
(main menu)
-
jump across in main or submenu
-
jump across between identical measurement values (e.g. span of
analog outputs 1 – 3)
>ESC<
-
delete values
-
each key action in menu
jumps back one level until
RUN menu
>ENTER<
-
press once; toggle from RUN menu to overview menu
(main menu)
-
activate a submenu
-
accept and store values, units and so on
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
