Instruction Manual
OCM F
Page 12
OCM F - Rev. 04 as of 18.02.2014
®
4.5
User’s Responsibility
In the EEA (European Economic Area) national implementation of the frame-
work directive 89/391/EEC and corresponding individual directives, in particu-
lar the directive 89/655/EEC concerning the minimum safety and health re-
quirements for the use of work equipment by workers at work, as amended,
are to be observed and adhered to.
In Germany the Industrial Safety Ordinance must be observed.
The customer must (where necessary) obtain any local
operating permits
re-
quired and observe the provisions contained therein. In addition to this, he must
observe local laws and regulations on
-
personnel safety (accident prevention regulations)
-
safety of work materials and tools (safety equipment and maintenance)
-
disposal of products (laws on wastes)
-
disposal of materials (laws on wastes)
-
cleaning (cleansing agents and disposal)
-
environmental protection.
Connections
Before operating the device the user has to ensure, that the local regulations
(e.g. for operation in channels) on installation and initial start-up are taken into
account, if this is both carried out by the user.
This instruction manual is a part of the device and must be available for the
user at any time.
The safety instructions contained within must be followed.
In addition to this instruction manual please see the "Technical Instruction of
Doppler Sensors" as well as the "Installation Instruction for Correlation and
Doppler Sensors" to correctly install and to operate the complete system.
It is strictly prohibited to disable the safety devices or to change the way they
work!
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
