Instruction Manual
OCM F
Page 70
OCM F - Rev. 04 as of 18.02.2014
®
There are cases where, despite comparatively high quality values, it is not
possible to correctly investigate the flow velocity reading due to poor frequen-
cy group distribution. In such cases install the flow velocity sensor in another
place. See „Installation Instruction for Correlation and Doppler Sensors“.
Quality = very good
Frequency distribution = very good
Quality = good
Frequency distribution = good
Quality = satisfactory
Frequency distribution = satisfactory
Quality = none
Frequency distribution = none
Quality = very good
Frequency distribution = poor
Quality = poor
Frequency distribution = satisfactory
Fig. 9-61
Flow velocity profiles
9.5.7 I/O Menu “External Level“
This menu is visible only if external level measurement is enabled. Here the pre-
vailing currents on analog input 1 and the height of the external level measure-
ment are indicated.
Fig. 9-62
External level selection
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
