Instruction Manual
OCM F
OCM F - Rev. 04 as of 18.02.2014
Page 81
Select the desired option using the >up< and >down< arrow keys and confirm
with the Enter key. The standard installation routine will install the software un-
der Windows® XP in the
C:\Programme\PaDa
directory. Parameter sets will be
saved there as well. Read out or open parameters either with EXCEL or an ap-
propriate editor application.
Load parameters
from device
Downloads the complete current parameter settings of the transmitter from
OCM F to PC/Laptop creating a file named "PARAM.TXT“.
Load modified pa-
rameters from device
Loads only parameters which have been modified in the unit (varying from de-
fault) using a file named "CHGPARAM. TXT“.
Send parameters to
device
Sends previously saved parameters ("PARAM. TXT“) to OCM F in case of acci-
dental system reset, faulty modification of specific settings or device defects.
Synchronises the parameters between PC/Laptop and OCM F. Copy the de-
sired parameters into the same directory as the "PaDa.exe“ before transmitting.
Send modified pa-
rameters to device
Use this function to send modified parameters to the transmitter. The file name
is "CHGPARAM. TXT“.
Do not close the tool window during data transmission! The window will close
automatically as soon as the transmission has been finished successfully!
In order to prevent data from being overwritten, move parameters which have
been read out before into a separate folder.
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
