Nivus osm-f, Operation Instruction Manual

Page: 48 / 103

Instruction Manual
OCM F
Page 48 OCM F - Rev. 04 as of 18.02.2014
®
To complete the name of the measurement place use the four arrow keys and
confirm your selection with >ENTER<. The cursor subsequently will jump one
digit to the right enabling you to choose the next character.
Delete unused characters by entering space. By pressing the both keys >right<
+ >down< or + >up< you can move the cursor to the right. Using the keys >left<
+ >down< or + >up< will move the cursor to the left.
1 Current name (of the measurement place)
2 Selected character
3 Selection list
Fig. 9-18 Setting the name (of the measurement place)
You can obtain the same movements as well if you move the cursor to the
rightmost or leftmost edge of the table by using >left< or >right<. As soon as the
cursor has reached the rightmost or leftmost edge of the table it will jump to the
desired position by one step on pressing >left< or >right< again.
Exit this part of the program with ESC. Decide to accept the new name, to cor-
rect the new name (= Back) or to abort the procedure subsequently
(see Fig. 9-19).
Fig. 9-19 Accepting the new name
Channel shape
You can select between following standard profiles according to ATV A110:
(dimensions to be entered in brackets)
-
Round pipe (diameter)
-
3er egg (diameter)
-
rectangle (channel height and width)
-
u-profile (channel height and radius)
-
trapezoid (channel height, trapeze width bottom/top, trapeze
height)
-
custom shape h / A
-
custom shape h / b