Instruction Manual
OCM F
OCM F - Rev. 04 as of 18.02.2014
Page 49
Fig. 9-20
Channel shape selection
Select channel shape with >Up< and >Down< keys.
Confirm selection with >Enter<.
The selected profile will be indicated in the bottom line of the display.
Fig. 9-21
Selected profile screen
If the existing profile does not comply with the options to select from, choose
>Custom shape< in this case
Confirm with >Enter<.
After having >custom shape< selected, first choose >channel dimensions<.
Channel dimensions
Type in the respective channel dimensions depending on the profile chosen
before.
Please observe indicated units!
Choosing >Custom shape< will indicate a table of 32 possible breakpoints on
the display. As described above, enter the relations between height-width or
height-area and enter the according value pairs.
Fig. 9-22
List of breakpoints for >Custom shape<
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
