Instruction Manual
OCM F
OCM F - Rev. 04 as of 18.02.2014
Page 67
9.5
Signal Input-/Output Menu (I/O)
This menu includes several submenus which both serve to assess and to check
sensors as well as to control signal inputs and outputs. It allows to indicate vari-
ous values (current values of inputs and outputs, relay conditions, distribution of
frequency groups etc.), however does not enable to influence signals or condi-
tions (offset, adjustment, simulation or similar). The menu therefore primarily
serves in order to assess the parameter settings and for error diagnosis.
Fig. 9-54
I/O Menu
9.5.1 I/O Menu “Digital Inputs”
Digital input values routed to the transmitter input clamps can be viewed here.
Select from either logically "OFF“ or "ON“.
Fig. 9-55
Screen digital values
9.5.2 I/O Menu “Analog Outputs”
This menu indicates the calculated values which have to be sent to the analog
converter as mA signals.
Fig. 9-56
Screen analog values
The actual current on the output clamps will not be displayed. The only signal
visible is the one the analog output converter is receiving for output purposes.
External faulty wiring neither can be detected nor indicated in this menu.
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
