Instruction Manual
OCM F
OCM F - Rev. 04 as of 18.02.2014
Page 59
Error input mask
This point is accessible only if error mode has been activated. Output signals
can be assigned to the respective error here. Available are Doppler-sensor,
external level, temperature, external set point input and slide valve. Velocity is
currently not yet available.
Choose the desired function with the >up< or >down< arrow keys and confirm
by pressing ENTER. A tick will appear as soon as the function has been con-
firmed. Pressing ENTER once more will deactivate the function again. Leave
this point by pressing ESC, see Fig. 9-41
All errors will be saved in the error memory (see Chap. 9.2 section “Error mes-
sages”).
Fig. 9-40
Extended submenu analog output
Fig. 9-41
Error input mask
Value at errors
Visible only if error mode has been enabled. This parameter is to define the
desired analog output condition if an error should occur (see also Fig. 9-42)
The following functions are available:
-
hold last value (holds the last value prior to error)
-
constant 0.0 mA
-
constant 3.6 mA
-
constant 4.0 mA
-
constant 20.457 mA
Fig. 9-42
Programming error output
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
