Instruction Manual
OCM F
OCM F - Rev. 04 as of 18.02.2014
Page 23
Important note
Before the first connection it is necessary to have a slight pressure on the
screw of the clamping connection to ensure safe opening and a correct con-
nection. All further clamps are tension spring clamps with screw clamps.
On power supply and relay clamps one copper wire with a maximum cross-
section of 2.5 mm² (0.01 in.) can be connected per clamp. Connection is made
by using terminal clamps and a screwdriver with a 3.5 mm (0.14 in.) blade.
Fig. 7-2
Connection Enclosure
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
