Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 143
Info
Information can be recalled only if the memory card is plugged. To be able to
indicate the remaining capacity time the card has to be plugged into the
OCM Pro for one hour at least.
Fig. 9-142 Card information
Note
The card can be replaced at any time unless the display indicates >Memory
card active< (will execute approx. 1 second each full hour).
Format card
This menu can be used to format the plugged memory card. Formatting should
be carried out after each data transfer as well as if the card is being used for the
first time. This process will take 10 – 60 seconds depending on card capacity
and is finished if the main screen appears again.
Important Note
Do not press any keys and do not turn the unit off as long as the card is being
formatted. Otherwise the card might be irreversibly damaged.
Fig. 9-143 Card formatting request
Important Note
All data saved on the card will get irreversibly lost during the formatting process.
Make sure to save your data prior to formatting!
Store parameter
The OCM Pro CF parameter settings can be read in or read out in order to
transfer the settings to similar measurement places or for data backup.
This menu point is used to save all parameters on the memory card. This
procedure takes approx. 30 seconds.
The progress is indicated by a corresponding bar.
