Instruction manual
OCM Pro CF
page 144
OCM Pro CF - Rev. 09 as of 07.06.2016
®
Fig. 9-144 Saving parameters on memory card
Load parameters
This menu point first of all shows all programming files available on the plugged
card. After being selected by using the cursor keys and subsequently confirming
with >Enter<, the desired file is going to be transmitted to the OCM Pro CF.
The name of the required file is "PARAMET.NIV".
save
= OCM Pro CF
à
card
load
= card
à
OCM Pro CF
Store backup
Data which have been stored within the past 14 days in the OCM Pro CF can be
"rescued" in case of data loss due to faulty data readout, defect cards,
unintentional formatting or similar. These data from the internal memory is used
for trend indication in RUN menu as well.
Fig. 9-145 Data backup
Day totals
It is possible to save day totals collected over 90 days to the memory card. The
data is saved as a file named >Total.txt< in the "Data" folder including date, time
and total (difference to previous day). The totalising time refers to the settings in
the "RUN / Day totals / Cycle" (see Fig. 9-10).
The memory operates as circular memory. This is why always the precious 90
days will be indicated.
Fig. 9-146 Save day totals
