Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 69
8.4 Operation Basics
The entire operation is menu driven and supported by explanatory graphics. To
navigate within the menu structure use the 4 control keys (see chapter 8.3).
Use these buttons to select main menus.
Buttons for scrolling within menus.
Selected submenus can be entered, inputs can be opened. The
“Enter“-key further serves to confirm data entries.
Escape submenus step by step. Cancels entered data.
-
These buttons are used for parameter setting and to enter digits. In
some sub menus the buttons are to input letters (e.g. name of
measuring point). Function compares with mobile phone or cell
phone buttons: multiple quick pressing switches over to the next
letter. The cursor will jump to the next digit if no key is pressed for
approx. 2 seconds.
The key “dot/i“ serves for entering digits. In RUN-Mode it also
recalls internal information on device, software version, MAC
address, serial no. of transmitter and connected NIVUS sensors.
Furthermore it restarts communication between transmitter, flow
velocity sensor and air-ultrasonic sensor.
This button is to switch between uppercase and lowercase letters
in text entry mode. Further it is used to delete and to insert data. In
the rest of the parameter setting mode it enables/disables various
functions, as well as SHIFT-key between various programming
options.
