Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 127
Analog I1 to I4
This setting has no meaning except for type OCP/M4 since this is the only unit
type which is equipped with additional analog inputs.
Use this key to toggle between:
NO
= according analog input will not be saved
and
YES
= according analog input will be saved
System
Use “Alt” key to toggle between:
NO
= system parameters will be saved
und
YES
= system parameters will be saved (system errors, error
messages, system ON and OFF events etc.)
Units
Define which units are to be used to save the 3 parameters flow, level and
velocity. Select from metric (e.g. litres, cubic metres, cm/s and more), English (ft,
in, gal/s, and more.) or American system (fps, mgd and more). After your
selection has been confirmed the display will jump to the next screen
automatically.
When it comes to be saved on memory card, it is possible to define a unit for
each of the measured and calculated flow, velocity and fill level readings. These
settings do not have an effect on the display.
There are various units available depending on the selection made previously.
(see chap. 9.3).
Fig. 9-106 Selecting the unit system in storage mode
Fig. 9-107 Selecting the measurement value in storage mode
