Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 165
Check output span
Check offset
Check output signal in I/O menu
Following systems
Check cables and connections as well as input and
output clamps.
Check input range (0 or 4-20 mA) of following
system.
Check input span of following system.
Check offset of following system.
No / incomplete data on
memory card
Memory card
Memory card defect. To be checked in menu:
I/O – Memory card – Info.
Unauthorised manufacturer
à
use NIVUS memory
card.
Improper memory size? Older systems are able to
read only memory cards up to 32 or 64 MB.
à
Verify by checking the CPU version (press I key).
Memory card with more than 128MB capacity
cannot be used currently!
Memory card formatted on PC. Send card to NIVUS.
Transmitter
Memory card not firmly plugged (not deep enough).
Memory card not plugged for a sufficient period of
time (min. required: 60 minutes! Data will be saved
every full hour).
Programming
Storage in Memory Mode –Operation Mode – Mode
not enabled.
