Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 103
Connecting 2 or 3 flow velocity sensors:
CAUTION
Avoid programming errors due to the lack of detailed knowledge
Programming additional sensors requires extensive hydraulic knowledge and
has to be carried out exclusively by NIVUS staff!
This is why profile parameter setting with several sensors is not mentioned
comprehensively.
Failure to observe may lead to fatal programming errors or even system fail-
ure.
Fig. 9-59
Selecting the number of flow velocity sensors
If 2 or 3 flow velocity sensors have been selected the screen below appears:
Fig. 9-60
Screen sensor type with 2 or 3 sensors
Select the sensor which is to be set under >Flow Velocity/Sensor No.<. The fol-
lowing screen appears:
Fig. 9-61
Select sensor type and mounting position
