Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 89
Fig. 9-35
Sensor type 3: 2-wire probe EX
Note
For connection see Fig. 7-12 or Fig. 7-29.
Sensor type 4:
Fixed value
This programming is designed for permanently full filled pipes and channels.
Level measurement is not required for such applications. The constant filling
level is entered under "Fixed value / Scale / Level" and is used for flow calcula-
tion.
This parameter is very helpful during initial start-up procedures or while perform-
ing tests without having level readings available as well.
Fig. 9-36
Sensor type 4: fixed value
Sensor type 5:
Internal pressure
Here the level is measured by using a combi sensor type V1D/V2D or V1U/V2U
with integrated pressure measurement cell from bottom up. Installation on the
sides, e.g. in case of sedimentation or high pollution loads is possible. Level
measurement in flooded condition is possible as well.
