Parameter Setting
NivuFlow Stick - rev. 00 / 27.01.2020
Page 55
Fig. 33-4 Change System Time: manually and automatically
The current system time can be set in the menu above (Fig. 33-4).
Set the time difference (UTC or GMT) to the prime meridian with “+” and “-”:
--
= decrease by 1 hour each
-
= decrease by ½ hour each
+
= increase by ½ hour each
++ = increase by 1 hour each
Fig. 33-5 Set Energy-Saving Mode/Powerdown
To save energy the transmitter goes to
>Powerdown<
mode after a defined period of inactiv-
ity. This period can be set between 5 minutes and 12 hours by the user. The period is always
specified in minutes.
Default setting
: 15 min.
The transmitter automatically saves the latest data before going to energy-saving mode.
To reactivate the transmitter turn off and then turn on again by using the on/off switch.
The transmitter will restart using the measurement place / measurement spot where it
has last been used actively.