Instruction Manual
NivuFlow Stick
Page 26
NivuFlow Stick - rev. 00 / 27.01.2020
Blue
flashing in the pause between the first long flash and the five successive flashes indi-
cates the number of users logged in: 1x for each user (max. number of possible users logged
in is four).
See also Sect. “28 General Programming”.
The LED is lit in
white
while the unit is powering up.
26 Setting Up Connection
26.1 General
The NivuFlow Stick is operated completely by using a standard smartphone/tablet or via
notebook/PC. Use the preferred display and operation module according to the respective
manufacturer specifications.
The following sections describe the connection setup procedures for Android, iOS and Win-
dows.
26.2 Android Operating System
Preparing the NivuFlow Stick:
1. Open the NivuFlow Stick enclosure cover and use the on/off switch to power up.
Steps on the display and operation module (smartphone, tablet, notebook, PC etc.):
1. Start the display and operation module.
2. Use the “Settings” symbol (Fig. 26-1 no. 1) to open the according menu.
Fig. 26-1 Settings symbol
3. Select WLAN (Fig. 26-2 no. 1).
Fig. 26-2 WLAN symbol
4. From the list of available WLANs select the NivuFlow Stick (Fig. 26-3 no. 1) with the
according SSID (default state = serial no.).