Safety Instructions
NivuFlow Stick - rev. 00 / 27.01.2020
Page 13
6 Liability Disclaimer
The legally associated companies and subsidiaries of NIVUS group assume no liability
•
for damages owing to a
change
to this document. The legally associated companies
and subsidiaries of the NIVUS group reserve the right to change the contents of this
document and this disclaimer at any time and without any notice.
•
for damages to persons or objects resulting from
failure to comply
with applicable
regulations
. When connecting, commissioning and operating the sensors, all available
information and higher local legal regulations (in Germany e.g. VDE regulations) such
as applicable Ex regulations as well as safety requirements and regulations in order to
avoid accidents shall be adhered to.
•
for damages to persons or objects resulting from
improper use
. For safety and warran-
ty reasons, all internal work on the instruments beyond that involved in normal installa-
tion and connection, must be carried out only by qualified NIVUS personnel or persons
or companies authorised by NIVUS.
•
for damages to persons or objects resulting from the use of instruments in technically
imperfect
condition.
•
for damages to persons or objects resulting from the use of instruments
not in accord-
ance with the requirements
.
•
for damages to persons or objects resulting from
failure to comply with safety infor-
mation
contained within this instruction manual.
•
for missing or incorrect measurement values or resulting consequential damages due to
improper installation
.
7 Use in accordance with the requirements
Note
The instrument is intended solely for the purpose described below.
Modifying or using the instruments for any other purposes without the written consent of the
legally associated companies and/or subsidiaries of NIVUS group will not be considered as
use in accordance with the requirements.
The legally associated companies and subsidiaries of NIVUS group cannot be held respon-
sible for any damage resulting from improper use. The user alone bears any risk.
The flow measurement system NivuFlow Stick and associated sensor system is designed for
the mobile flow measurement covering the scope of discharge measurement in flowing wa-
ters.
The NivuFlow Stick is designed and manufactured in accordance with the current state of the
art and with the recognised safety rules and regulations applicable at the time this document
is issued. Danger to persons or material damage cannot be completely ruled out, however.
The maximum permissible limit values as specified in Sect. “17 Specifications” shall be nec-
essarily observed. Any case varying from these conditions which is not approved by NIVUS
GmbH in written form is left at the owner’s risk.