Instruction Manual
NivuFlow Stick
Page 42
NivuFlow Stick - rev. 00 / 27.01.2020
29.2.5
Menu - Battery (12V)
Fig. 29-6 Menu Battery
This menu is used to choose type and number of the batteries used.
Correct Capacity Indication
The capacity indication in the >System< / >Information< menu works reliably only as long
as completely charged batteries are used and the type and number of the batteries used
are specified here.
30 Application Parameters Menu
Fig. 30-1 Application Menu
The following section describes the general parameter setting procedures.
30.1 Menu Measure Place
The >Measurement Place< submenu can be set up as dedicated “default measurement
place” independent from the default settings which then can be saved (e.g. as “default meas-
urement place” or “basic measurement place” or similar) and loaded again and again. This
default data set exists only once in the transmitter but can be overwritten and saved newly,
however.