Nikon Eclipse Ti Series, Setup Manual

Page: 237 / 329

Chapter 6 Connection between the Laser Unit and the Microscope
6.2 Attaching the Optical Fiber to the Light Source
1-223
Using C1 single mode fiber
Draw the optical fiber through the round ring metal cover and attach the optical fiber to the FC connector.
When inserting the cable, be sure to align it with the FC connector's notch, and then fully screw in the
knurled section. After attaching the fiber, tighten the clamp screw to secure the round ring metal cover.
IN IN
N
D
8
IN
N
D
2
N
D
16
CA
UTION
–
CLASS 3B
LASER RADIA
TION
WHEN OPEN
A
V
OID EXPOSURE
T
O
THE BEAM
V
O
RSICHT
–
LASERSTRAHLUNG
KLASSE 3
B
,
WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL A
U
SSETZEN
Figure 6.2-2
(The figure shows TI-TIRF.)
Fiber
Round ring metal cover
FC connector