Nikon 25338 User Manual Download Page 67

Page: 67 / 240

Chapter 10

The Edit List

Adjust & Filter
Pull-Down Menu

Any feature from either the

Adjust

Menu or the

Filter

Menu that is added

to a step will appear within an Adjust

& Filter pull-down Menu. Additionally,

new steps created with the New Step

button will contain an empty Adjust

& Filter pull-down Menu. You can use

this Menu to gain access to any of the

enhancements that are available within

the

Adjust

Filter

Menus instead

of navigating to the actual

Adjust

Filter

Menus.

Additionally, you can use this Menu to

perform a Swap Enhancement function.

Please refer to page 69 for more

information about this function.

Opacity Mixer

The Opacity Mixer provides you with

the ability to blend either the current

enhancement or all Control Points

of the same type with the rest of the

image.

The Opacity Mixer option becomes avail-

able as soon as you add any features

from the

Adjust

Control Point

, or

Filter

Menus. Click on the

button

next to the Opacity Mixer entry located

directly beneath the feature that you

wish to blend differently. This will display

the Opacity Mixer dialog.

Within the Opacity Mixer Dialog you

can adjust the opacity and channels

that the current enhancement will

affect, and you can blend the enhance-

ment in different ways with the effects

from the previous steps.

CHANNELS

Start by selecting the Channels you

wish to apply the current enhance-

ment to. The available options are All,

Luminance and Chrominance, and RGB.

Summary of Contents for 25338

















































































































































































































































Search results

Summary of Contents for 25338

Reviews:

Related manuals for 25338

Brands by name

Popular brands

Nikon 25338, User Manual

Search results

Summary of Contents for 25338

Reviews:

Related manuals for 25338

Brands by name

Popular brands