Nikon 25338 User Manual Download

Page: 217 / 240

211

Appendix

Short-cuts

Tool

Windows

Macintosh

Keyboard Modifier

Direct Select (arrow)

Holding down the Ctrl (Windows) or Option (Mac OS) key while dragging an image in the Browser
copies the image.

Pan (hand)

Spacebar while working with any other tool temporarily switches that tool to the Hand Tool.

Zoom

C Spacebar (Windows) or C Spacebar (Mac OS) while in any other tool will temporar-
ily turn to the zoom in tool.

Ctrl + Alt + Spacebar (Windows OS) or C Spacebar (Mac OS) while in any other tool
will temporarily turn into the zoom out tool.

Rotate 90 degrees Clockwise

Ctrl + R

C R

Rotate 90 degrees Counter-
Clockwise

Ctrl + Shift + R

C Shift + R

Crop

Holding down the Alt / Option key while in the middle of a crop shows the Crop Gridlines.

Color Control Point

Ctrl + Shift + A

C Shift + A

Decrease Size of Brush

[

Increase Size of Brush

]

Softer Brush

Shift + [

Harder Brush

Shift + ]

Plus Brush

Holding down Alt (Windows) or Option (Mac OS) while brushing with the Plus Brush temporarily turns
the brush into a Minus Brush.

Minus Brush

Holding down Alt (Windows) or Option (Mac OS) while brushing with the Minus Brush temporarily
turns the brush into a Plus Brush.

Fill

Alt + Backspace

Delete

Clear

Shift + Backspace

Shift + Delete

Plus Gradient

Appendix: Short-cuts

Summary of Contents for 25338

















































































































































































































































Search results

Summary of Contents for 25338

Reviews:

Related manuals for 25338

Brands by name

Popular brands

Nikon 25338, User Manual

Search results

Summary of Contents for 25338

Reviews:

Related manuals for 25338

Brands by name

Popular brands