Nikon 25338 User Manual Download

Page: 228 / 240

222

Appendix

Advisories & Additional Notices

File Naming Conventions

Windows: File names may not contain

quotes or any of the following charac-

ters: “\” “/” “:” “.” “*” “?” “<“ “>”

and “|”..

Macintosh: File names may not

contain Colons (“:”) and if the file is

to be shared with a user of Microsoft

Windows, the file may not contain

quotes or any of the following charac-

ters: “\” “/” “.” “*” “?” “<“ “>” and

“|”.

Printing

Setting up Your Printer

Note that the printer must be properly

connected and the printer drivers

correctly installed.

Please note

: If the image will not

fit in the printable area at the current

printer and paper size settings when

you click the Print button to begin

printing, a message will be displayed

warning that the image will be cropped

to fit the printable area. Choose a

larger paper size or reduce the size of

the image using the Size/Resolution

palette.

Size / Resolution

Please note

: The units for size and

resolution are lost when settings are

saved using the Save option.

Color Management
Preferences (Windows)

Multiple Displays

In a multiple display environment,

choose a single profile suited to all

displays.

Supported Color Profiles

Capture NX supports only ICC

(International Color Consortium)

monitor and CMYK profiles. Particular

care should be exercised when choosing

a CMYK profile, as the profile supplied

by the manufacturer of your output

device may not be an ICC profile.

Please note

: See Appendix:

Supplied Color Profiles (

214) for

more information on the default RGB

color-space profiles.

Please note

: The “NKCMYK.

icm” (Windows) and “Nikon CMYK

4.0.0.3000” (Macintosh) CMYK profiles

provided with Capture NX are general-

purpose, almost neutral profiles that

are not based on a specific ink set,

making them suited for use where

output conditions are not known.

Summary of Contents for 25338

















































































































































































































































Search results

Summary of Contents for 25338

Reviews:

Related manuals for 25338

Brands by name

Popular brands

Nikon 25338, User Manual

Search results

Summary of Contents for 25338

Reviews:

Related manuals for 25338

Brands by name

Popular brands