Nidec Digitax HD M753 EtherCAT, User Manual, Page: 206 / 262

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
EtherCAT
interface
SD Card
Operation
Onboard
PLC
Advanced
parameters
Diagnostics
UL listing
information
206
Digitax HD M753 Control User Guide
Issue Number: 3
Parameter
Range(  ) Default(  )
Type
OL RFC- A RFC- S OL RFC-A RFC-S
12.001 Threshold Detector 1 Output Off (0) or On (1) RO Bit ND NC PT
12.002 Threshold Detector 2 Output Off (0) or On (1) RO Bit ND NC PT
12.003 Threshold Detector 1 Source 0.000 to 59.999 0.000 RW Num PT US
12.004 Threshold Detector 1 Level 0.00 to 100.00 % 0.00 % RW Num US
12.005 Threshold Detector 1 Hysteresis 0.00 to 25.00 % 0.00 % RW Num US
12.006 Threshold Detector 1 Output Invert Off (0) or On (1) Off (0) RW Bit US
12.007 Threshold Detector 1 Destination 0.000 to 59.999 0.000 RW Num DE PT US
12.008 Variable Selector 1 Source 1 0.000 to 59.999 0.000 RW Num PT US
12.009 Variable Selector 1 Source 2 0.000 to 59.999 0.000 RW Num PT US
12.010 Variable Selector 1 Mode
Input 1 (0), Input 2 (1), Add (2), Subtract (3), Multiply (4),
Divide (5), Time Const (6), Ramp (7), Modulus (8),
Powers (9), Sectional (10)
Input 1 (0) RW Txt US
12.011 Variable Selector 1 Destination 0.000 to 59.999 0.000 RW Num DE PT US
12.012 Variable Selector 1 Output ±100.00 % RO Num ND NC PT
12.013 Variable Selector 1 Source 1 Scaling ±4.000 1.000 RW Num US
12.014 Variable Selector 1 Source 2 Scaling ±4.000 1.000 RW Num US
12.015 Variable Selector 1 Control 0.00 to 100.00 0.00 RW Num US
12.016 Variable Selector 1 Enable Off (0) or On (1) On (1) RW Bit US
12.023 Threshold Detector 2 Source 0.000 to 59.999 0.000 RW Num PT US
12.024 Threshold Detector 2 Level 0.00 to 100.00 %
0.00 %
RW Num US
12.025 Threshold Detector 2 Hysteresis 0.00 to 25.00 % RW Num US
12.026 Threshold Detector 2 Output Invert Off (0) or On (1) Off (0) RW Bit US
12.027 Threshold Detector 2 Destination 0.000 to 59.999 0.000 RW Num DE PT US
12.028 Variable Selector 2 Source 1 0.000 to 59.999 0.000 RW Num PT US
12.029 Variable Selector 2 Source 2 0.000 to 59.999 0.000 RW Num PT US
12.030 Variable Selector 2 Mode
Input 1 (0), Input 2 (1), Add (2), Subtract (3), Multiply (4),
Divide (5), Time Const (6), Ramp (7), Modulus (8),
Powers (9), Sectional (10)
Input 1 (0) RW Txt US
12.031 Variable Selector 2 Destination 0.000 to 59.999 0.000 RW Num DE PT US
12.032 Variable Selector 2 Output ±100.00 % RO Num ND NC PT
12.033 Variable Selector 2 Source 1 Scaling ±4.000 1.000 RW Num US
12.034 Variable Selector 2 Source 2 Scaling ±4.000 1.000 RW Num US
12.035 Variable Selector 2 Control 0.00 to 100.00 0.00 RW Num US
12.036 Variable Selector 2 Enable Off (0) or On (1) On (1) RW Bit US
12.040 Brake Control: Brake Release Off (0) or On (1) RO Bit ND NC PT
12.041 Brake Control: Enable Off (0) or On (1) Off (0) RW Bit US
12.042 Brake Control: Upper Current Threshold 0 to 200 % 50 % RW Num US
12.043 Brake Control: Lower Current Threshold 0 to 200 % 10 % RW Num US
12.044
Brake Control: Brake Release Frequency 0.0 to 20.0 Hz 1.0 Hz RW Num US
Brake Control: Brake Release Speed 0 to 200 rpm 10 rpm RW Num US
12.045
Brake Control: Brake Apply Frequency 0.0 to 20.0 Hz 2.0 Hz RW Num US
Brake Control: Brake Apply Speed 0 to 200 rpm 5 rpm RW Num US
12.046 Brake Control: Brake Delay 0.0 to 25.0 s 1.0 s RW Num US
12.047 Brake Control: Post-brake Release Delay 0.0 to 25.0 s 1.0 s RW Num US
12.048 Brake Control: Brake Apply Delay 0.0 to 25.0 s 1.0 s RW Num US
12.049
Brake Control: Enable Position Control During
Brake Release
Off (0) or On (1) Off (0) RW Bit US
12.050 Brake Control: Initial Direction Ref (0), Forward (1), Reverse (2) Ref (0) RW Txt US
12.051
Brake Control: Brake Apply Through Zero
Threshold
0.0 to 20.0 Hz 0 to 200 rpm 1.0 Hz 5 rpm RW Num US
12.052 Brake Control: Mode Off (0) or On (1) Off (0) RW Bit US
12.054 External Brake Released Indicator Off (0) or On (1) Off (0) RW Bit
12.055 Brake Release Source Off (0) or On (1) Off (0) RW Bit US
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination