New lift FST, Manual

Page: 54 / 174

4 Technical Data
4.3 VSM pre-selection module
52
FST_HB.EN04/03
VSM: X2 Pre-selection “A”
1 Door lock conductor B (bridged with terminal X3.8 at zero
potential)
2 Pre-selection contact 3 (potential X2.4)
3 Pre-selection contact 2 (potential X2.4)
4 Door lock conductor B (bridged with terminal X2.6 at zero
potential)
5 Not assigned
6 Door lock conductor A (bridged with terminal X1.2 at zero
potential)
7 Pre-selection contact 1 (safety circuit potential)
8 Pre-selection contact 0 (safety circuit potential)
9 Zero conductor (the type verification certificate requires a zero
conductor of the motor contactors)
(output)
VSM: X3 Pre-selection “B”
1 Pre-selection contact 8.NC (potential X3.8)
2 Pre-selection contact 8.NO (potential X3.8)
3 Pre-selection contact 7.NC (potential X3.8)
4 Pre-selection contact 7.NO (potential X3.8)
5 Pre-selection contact 6 (potential X3.8)
6 Pre-selection contact 5 (potential X3.8)
7 Pre-selection contact 4 (potential X3.8)
8 Door lock conductor C (bridged with terminal X2.1 at zero
potential)
VSM: X4 24V monitoring
1 +24V
2 0V / GND
3 Correction switch, top “CT”
4 Correction switch, bottom “CB”
5 Motor monitoring
6 Standstill monitoring
7 Brake monitoring
VSM: X5 A6 Safety Circuit
1 +24V
2 0V / GND
3 Zone enabling (output)
4 Zone message (input)
5 Zone switch “A” (antivalent to “B”)
6 Zone switch “B” (antivalent to “A”)