New lift FST, Manual

Page: 151 / 174

1 Menu tree
1.10 TEST MENU
FST_HB.EN04/03
149
1.10 TEST MENU
Menu item Description Setting range
Fault Reset Reset runtime failures that caused the system to stop. All error
messages starting with
DRM-
shut down the system (error
LED illuminates). The shutdown can be reset with “Fault
Reset”.
³
YES
NO
Door Lock or unlock car doors (during maintenance work). Locked
car doors are marked with an X after the door letter in line C
of the FST display (see “Statusmeldungen in Zeile C” on
page 14). The door lock remains even when switching the
controller on and off.
³
Lock
Unlock
Test Drive Place calls using the FST keypad. With test drive activated
line C of the FST display shows
Target = ..
. Select the target floor using keys
£
/
¢
.
Execute the call by pressing
E
.
ON
OFF
Auto Test Drive Trigger automatic generation of in-car calls (see
MAIN MENU
– Config – Auto Test Drive
page 118). With
automatic test drive activated line C of the FST display shows
T
.
ON
OFF
Service Mode In service mode external error messages are suppressed (e.g.
collective error messages). In Service Mode line B of the FST
display shows
SERVICE MODE!
.
ON
OFF
Endswitch Test Top Slow travel to the top limit switch.
This test cannot be started from the top floor!
After starting the test with YES button
E
must be pressed
until reaching the limit switch (dead man control).
³
YES
NO
Endswitch Test Bot Slow travel to the bottom limit switch.
This test cannot be started from the bottom floor!
After starting the test with YES button
E
must be pressed
until reaching the limit switch (dead man control).
³
YES
NO
V-Mon. Test Top Test speed monitoring at the top.
This test can only be performed if the speed monitoring
function is enabled (see
MAIN MENU – Drive – End-
Sw.Speed Mon.
page 114)!
This test cannot be started from the top floor!
After starting the test with YES button
E
must be pressed
until the end switch speed monitoring function reacts (dead
man control).
³
YES
NO
V-Mon. Test Bot. Test speed monitoring at the bottom.
This test can only be performed if the speed monitoring
function is enabled (see
MAIN MENU – Drive – End-
Sw.Speed Mon.
page 114)!
This test cannot be started from the bottom floor!
After starting the test with YES button
E
must be pressed
until the end switch speed monitoring function reacts (dead
man control).
³
YES
NO
DRM Test Testing runtime monitoring.
³
YES
NO