New lift FST, Manual

Page: 88 / 174

4 Technical Data
4.10 RIO-ADM remote I/O module
86
FST_HB.EN04/03
4.10 RIO-ADM remote I/O module
The RIO-ADM remote I/O module provides 12 programmable inputs/
outputs at any position of the LON bus. The RIO-ADM is connected to the
FST via the LON bus.
One controller can be equipped with up to six RIO-ADMs at different
locations.
Technical Data
Number Description Ports
1 RIO-ADM 8 .. 19 Port[8] .. Port[19]
2 RIO-ADM 20 .. 31 Port[20] .. Port[31]
3 RIO-ADM 32 .. 43 Port[32] .. Port[43]
4 RIO-ADM 44 .. 55 Port[44] .. Port[55]
5 RIO-ADM 56 .. 67 Port[56] .. Port[67]
6 RIO-ADM 68 .. 79 Port[68] .. Port[79]
Description Value Unit
Supply voltage 24 ±10% V DC
Power consumption 50 mA
Max. switch-on current per output for
approx. 40 ms 600 mA
Outputs Excess load and short-circuit proof
Inputs/outputs Low-active
Length × width × height 54 × 50 × 17.5 mm
Temperature range
Storage / transport –20 - +70 °C
Operation ±0 - +60 °C
Relative humidity
Storage / transport 5 - 95 %
Operation 15 - 85 %