New lift FST, Manual

Page: 128 / 174

1 Menu tree
1.4 MAIN MENU – Config
126
FST_HB.EN04/03
Park Drive Programs The FST-Controller has a scheduler (calendar) that enables time- and day-
dependant park drive programs. Each day of the week (SU – SA) can de
divided in three time zones. Different park drive programs (park floor and
waiting period) can be set for each of these time zones.
Direction Priority of the current direction of travel before changing
direction. Important parameter for collective control: The time
must be set at least so that passengers calling the car with a
landing call have ample time to enter the car and issue a
command for the current direction of travel (at least 5 …15
sec, depending on the size of the car). If the delay is too short
the car can be “snatched away” by a landing call in the
opposite direction before the in-car call has been placed. 0 ... 30 sec
Departure Arrows Mode of the departure arrow outputs ADM X3.8 and X3.9 on
the landing button module:
“YES”: Display of direction with departure arrows
“NO”: Display of direction with direction arrows
“Only when door open”: Display of direction as departure
arrow only when car door is open Yes
No
only when door open
Depart.Arrows Max Maximum on-time of departure arrows when the car is not
moving. 0 ... 9999 sec
DoorC=Emerg-EndSw. Door C input VSM X1.5 on the pre-control module is
interpreted and stored as a top emergency limit switch with
hydraulic lifts, according to EN 81. YES
NO
Menu item Description Setting range
Code Description Setting range
Day
Weekday SU … SA
from
Start time of the time zone 0:00 ... 23:45
to
End time of the time zone 0:00 ... 23:45
Prog
Program 1 ... 3 (for time zone 1 ... 3) 0 ... 2
Floor
Floor: park floor 0 ... top floor
W-Time
Waiting period before starting the park drive. 0 ... 60 min