•
Select the check box for a wired LAN port or WiFi port.
-
If your device is connected to an Ethernet port on the router, select the LAN
port check box that corresponds to the Ethernet port on the router to which
the device is connected.
-
If your device is connected to your router’s WiFi network, select the WiFi check
box that corresponds to the router’s WiFi network to which the device is
connected.
You must select at least one LAN port or WiFi port. You can select more than one
port.
9. Click the Add button.
The VLAN/Bridge Settings page displays again. The VLAN tag group is added to
the table on that page.
10. Click the Apply button.
Your settings are saved.
Set Up an IPTV Port to Lease an Intranet Port
You can set up the router to create an Internet Protocol television (IPTV) port that can
lease an IP address from your IPTV service provider. Use this feature only if you subscribe
to an IPTV service and your IPTV service requires an intranet address.
Some IPTV ports cannot work behind NAT because the IPTV port requires an IP address
within the Internet service provider’s network (intranet address). You can set up a bridge
connection from the WAN to one of the LAN ports. When IPTV is connected through
WiFi, the home router also must support the bridging of the WAN port to the WiFi
network name (SSID). The designated LAN port or WiFi network name becomes an IPTV
port with direct access to the WAN without going through NAT.
To set up an IPTV port to lease an intranet port from your IPTV service provider:
1. Launch a web browser from a computer or mobile device that is connected to the
network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The Dashboard displays.
4. Select Settings > Advanced Settings > VLAN/Bridge Settings.
User Manual
123
Manage the Router’s Network
Settings
Nighthawk Pro Gaming Router Model XR1000
