manualshive.com logo in svg

Nera WiLink-I 3000, System Manual

The Nera WiLink-I 3000, a cutting-edge wireless communication device, is accompanied by a comprehensive System Manual for user convenience. This invaluable manual can be easily downloaded for free from our website, enabling users to access detailed instructions and maximize their experience with this exceptional product.

Share
Download
background image

154

Operation

Chapter 4 - Operation and Administration

Also the Forwarding Rule selection parameter is not applicable to transparent 
Service Profiles. All transparent Service Profiles share a single pre-configured 
Forwarding Rule, and a pre-configured QoS Profile for multicasts. For details on 
these profiles refer to 

Table 4-20

 and 

Table 4-21

. The pre-configured Transparent 

Forwarding Rule can be modified but not deleted.

¢

For tagged packets, the VPL ID will be their VLAN tag. 

¢

For untagged packets, the VPL ID will be None. 

For packets received from the network, the forwarding decision will be according 
to the packet's VPL ID. If the VPL ID is unknown (either None or not included in 
the list of VPL IDs defined for any of the existing, non-transparent Service 
Profiles), the system will assume this is a transparent VLAN packet (if at least one 
transparent Service is defined) and transfer it with the original VLAN tag (or 
untagged if there is no VLAN tag). 

When set to Off, data packets sent from the Base Station to the backbone will be 
transferred with a VLAN tag according to the VPL ID. The VLAN ID in tagged 
frames arriving from the wireless network will be replaced by the VPL ID. For 
packets received from the network, the forwarding decision will be according to 
the Forwarding Rule defined in the Service Profile with a matching VPL ID. 

To avoid conflicts, a transparent Service Profile cannot be assigned to a Service if 
the Service's VLAN ID list includes a VLAN ID that is equal to any of the already 
assigned VPL IDs. 

4.10.4.4.4

VPL ID

A Virtual Private Link ID to be used in the backbone behind the Base Station. The 
VPL ID parameter is applicable only to Service Profiles with VLAN Transparency 
Mode Off.

NOTE

The combination of VLAN Transparency Service On, Hybrid VLAN Mode Off and an empty VLAN 
List means that all packets are forwarded. This combination should be used only if the Service 
Provider can ensure that there will not be conflicts between VLAN IDs used by devices behind the 
SU and existing VPL IDs.

NOTE

The combination VLAN Transparency Mode On, Hybrid VLAN Mode On and an empty VLAN List 
means that only untagged frames should be forwarded. Such a Service cannot be assigned if there 
is an assigned non-transparent Service with VPL ID = None.

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments

Related manuals for WiLink-I 3000

Tailfin X Series Assembly Instructions preview
X Series
Brand: Tailfin Pages: 4
Gates AVCCAM AG-3DA1 Using preview
AVCCAM AG-3DA1
Brand: Gates Pages: 2
Panasonic AJHVF21G - HD EVF - MULTI-LANG Parts List preview
AJHVF21G - HD EVF - MULTI-LANG
Brand: Panasonic Pages: 4
Garmin GFS 10 - Fuel Sensor Configuration Manual preview
GFS 10 - Fuel Sensor
Brand: Garmin Pages: 2
kaarta STENCIL PRO Assembly & Use preview
STENCIL PRO
Brand: kaarta Pages: 29
Kathrein DDA Series User Manual preview
DDA Series
Brand: Kathrein Pages: 7
Kathrein ESD 64 Manual preview
ESD 64
Brand: Kathrein Pages: 2
Napoleon LV38N Instructions preview
LV38N
Brand: Napoleon Pages: 4
Napoleon GD19 Instructions preview
GD19
Brand: Napoleon Pages: 4
Napoleon BHD4 SEE-THRU Installation Instructions preview
BHD4 SEE-THRU
Brand: Napoleon Pages: 2
ZEPP HEAD Handbook preview
HEAD
Brand: ZEPP Pages: 36
SAF-HOLLAND FleetMaster Air FW8 Series Owner'S Manual preview
FleetMaster Air FW8 Series
Brand: SAF-HOLLAND Pages: 20
Standby L54 Manual preview
L54
Brand: Standby Pages: 10
Sierra Monitor Corporation 5398-21 Specification Sheet preview
5398-21
Brand: Sierra Monitor Corporation Pages: 1
R&G FI0054BK Fitting Instructions preview
FI0054BK
Brand: R&G Pages: 4
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
Soehnle 68072 Operating Instructions Manual preview
68072
Brand: Soehnle Pages: 20
Mechatron ATC Series Operating Manual preview
ATC Series
Brand: Mechatron Pages: 60

Brands by name

Popular brands

Load more brands