manualshive.com logo in svg

Nera WiLink-I 3000, System Manual

The Nera WiLink-I 3000, a cutting-edge wireless communication device, is accompanied by a comprehensive System Manual for user convenience. This invaluable manual can be easily downloaded for free from our website, enabling users to access detailed instructions and maximize their experience with this exceptional product.

Share
Download
background image

2

System Description

Chapter 1 - System Description

1.1

Introducing WiLink-I

WiLink-I is a WiMAX platform for the 3 - 4 GHz licensed frequency bands. It 
leverages the market-leading knowledge of Broadband Wireless Access (BWA), 
industry leadership, proven field experience, and core technologies including 
many years of experience with OFDM technology.

Built from the ground up based on the IEEE 802.16/ETSI HIPERMAN standards, 
WiLink-I 3000 is designed specifically to meet the unique requirements of the 
wireless Metropolitan Area Network (MAN) environment and to deliver broadband 
access services to a wide range of customers, including residential, SOHO, SME 
and multi-tenant customers. Its Media Access Control (MAC) protocol was 
designed for point-to-multipoint broadband wireless access applications, 
providing a very efficient use of the wireless spectrum and supporting difficult 
user environments. The access and bandwidth allocation mechanisms 
accommodate hundreds of subscriber units per channel, with subscriber units 
that may support different services to multiple end users. 

The system uses OFDM radio technology, which is robust in adverse channel 
conditions and enables operation in non line of sight links. This allows easy 
installation and improves coverage, while maintaining a high level of spectral 
efficiency. Modulation and coding can be adapted per burst, ever striving to 
achieve a balance between robustness and efficiency in accordance with 
prevailing link conditions.

WiLink-I supports a wide range of network services, including Internet access (via 
IP or PPPoE tunneling), VPNs and Voice over IP. Service recognition and multiple 
classifiers that can be used for generating various service profiles enable 
operators to offer differentiated SLAs with committed QoS for each service profile.

WiLink-I products are currently available in the 3.3 GHz, 3.5 GHz and 3.6 GHz 
frequency bands, as shown in the following tables. The actual operating 
frequencies used by the system can be configured according to applicable radio 
regulations, license conditions and specific deployment considerations.

Table 1-1: 3.3 GHz Frequency Bands

Series (band)

Duplex Separation 

Uplink Frequency

Downlink Frequency

3.3e

50 MHz

3366-3385 MHz

3316-3335 MHz

3.3f

50 MHz

3381-3400 MHz

3331-3350 MHz

3.3g

-76 MHz

3300-3324 MHz

3376-3400 MHz

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments

Related manuals for WiLink-I 3000

Tailfin X Series Assembly Instructions preview
X Series
Brand: Tailfin Pages: 4
KC HiLiTES C Series Wiring Diagram preview
C Series
Brand: KC HiLiTES Pages: 4
Canon XF705 User Manual preview
XF705
Brand: Canon Pages: 115
Canon DADF-M1 General Timing Chart/General Circuit Diagram preview
DADF-M1
Brand: Canon Pages: 16
Canon AE-1 Installation Procedures Manual preview
AE-1
Brand: Canon Pages: 48
GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
FujiFilm FJ-5120LV Operating Instruction preview
FJ-5120LV
Brand: FujiFilm Pages: 13
Scame electrical solutions OPTIMA-EX 125A Installation, Use And Maintenance Manual preview
OPTIMA-EX 125A
Brand: Scame electrical solutions Pages: 8
SR Suntour RUX RC2 DH Setup Manual preview
RUX RC2 DH
Brand: SR Suntour Pages: 10
Kask PLASMA AQ Use And Care Booklet preview
PLASMA AQ
Brand: Kask Pages: 68
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
S+S Regeltechnik THERMASGARD HFTM-Q Operating Instructions, Mounting & Installation preview
THERMASGARD HFTM-Q
Brand: S+S Regeltechnik Pages: 16
ABC Design Kiddie Ride On Instructions Manual preview
Kiddie Ride On
Brand: ABC Design Pages: 11
Zagg Sparq Powerbank 6000 Instructions Manual preview
Sparq Powerbank 6000
Brand: Zagg Pages: 16
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Jenn-Air AC110 series Use And Care Manual preview
AC110 series
Brand: Jenn-Air Pages: 16

Brands by name

Popular brands

Load more brands